Content
OSPF Becomes a Distance Vector Protocol
Your network is fully meshed using Frame relay virtual circuits (DLCIs) and runs OSPF as an interior routing protocol. Through the lab exercise, you will verify how OSPF gets distance vector behavior and how this behavior can affect the convergence of your network.
You will configure Type 3 LSA filter on Area Border Routers (ABRs) to ensure that they don’t accept summary LSAs for prefixes known to be in area 1 from the backbone area.
Objectives
Upon finishing this exercise, you will be able to:
Observe OSPF behavior in multi area network
- Configure prefix list
- Configure OSPF area filter list
Exercise Duration
1.5 hour(s)